Please wait while the page loads...

2013 Acura RLX Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also favored as the OBD (on-board computer diagnostic system) in your RLX. There are hundreds of different codes that your check engine light can hint. While that sounds daunting, with a scant patience, tackling crucial diagnostics will give you reasonable knowledge about your vehicle and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, detectable and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are also hundreds of possible reasons for the light, including:

  • Old Battery
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Computer output circuit issues
  • Bad Spark Plugs
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Transmission issues

This is why it is primary for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a unhealthy concern, you risk contentious your automobile further by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Acura mechanic. Call David McDavid Acura of Austin at 5126436468 today or schedule your check engine light service online today!

Check Engine Light Service 2013 Acura RLX

What do you do when you’re driving along in your Acura RLX and quickly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Acura owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Acura RLX checked as soon as available. Ignoring that warning could end up causing main damage to expensive engine components.

When your 2013 Acura RLX's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Acura auto repair mechanics at David McDavid Acura of Austin. There are also a number of relatively bargain code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2013 Acura RLX will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going correct, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Acura RLX light will go off after about 20-40 miles. If you commute over that amount and the light is still on, you will need to bring it in to David McDavid Acura of Austin so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2013 Acura RLX?

When your check engine light comes on, this could be as friendly as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a critical problem that could cause critical damage to your engine and come with a extraordinary repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow often means something less critical but a flashing check engine light hints that your vehicle’s engine is in critical trouble and service is mandatory urgently. If your check engine light is flashing in your 2013 Acura RLX, we particularly suggest not to drive the automobile and schedule Acura service today. Below is a list of the most daily reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are basic for your 2013 Acura RLX. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or departed, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, colossal to more fancy repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Acura RLX is what determines how much fuel is basic to run your engine efficiently by measuring the reward of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Acura RLX is having trouble starting, idling rough or has a swift change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • One of the most logical and frequent cause is that your 2013 Acura RLX gas cap is loose, damaged or missing. The gas cap for your 2013 Acura RLX serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is departed or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on immediately after you put gas in your 2013 Acura RLX, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • The battery is poor or dead. The battery in your 2013 Acura RLX is every bizarre. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a lot decades ago, and they don't really require maintenance. The price of a new one depends on the type of Acura you drive, but check our prevailing service coupons and specials.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Acura RLX’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why David McDavid Acura of Austin offers a complimentary multi-point inspection with every Acura service. If you have an issue with your catalytic converter and don't get it fixed, your 2013 Acura RLX will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause diverse problems from overheating.
  • Your 2013 Acura RLX has a vacuum leak. Every Acura RLX has a vacuum system that performs a expansive variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceedingly if they’re exposed to exciting heat or extreme chilly.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or diverse item can wreak havoc on your 2013 Acura RLX if it’s not installed accurately. These aftermarket elements and accessories can deposit the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound modern, transport your RLX to Acura and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, exceedingly aftermarket parts and accessories, or using OEM elements first place might value a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the reward of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less competent when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Acura RLX's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to represent the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

2013 Acura RLX Check Engine Light

A blinking light indicates that the problem is unhealthy and if not taken care of shortly may result in enormous damage to the vehicle. If the check engine light in your 2013 Acura RLX starts blinking, that means that the problem needs hasty attention and your Acura should be brought in shortly. This blinking light usually indicates a draconian engine misfire allowing unburned fuel to be ejected into the exhaust system. There it can shortly improve the temperature of the catalytic converter to a point where damage is potential, requiring an costly repair. Some owners ask if spark plugs cause the check engine light to flash? This can totally be the cause. A bad, departed or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive experts at David McDavid Acura of Austin expeditiously by calling 5126436468.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is troublesome to predict how innumerable miles you can travel to work with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact David McDavid Acura of Austin to help determine if your vehicle is safe to travel to work in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced.

2013 Acura RLX Check Engine Light Flashing

Although there are countless capacity causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a few rational causes including something as specific as a loose gas cap. Substitute rational reasons for a Check Engine Light are faulty head gasket, damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Acura Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Acura issue was fixed.

Every 2013 Acura RLX was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continuously detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what absolutely is guilty nor what to do about it. That’s where we come in; David McDavid Acura of Austin provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Immensely Qualified Service high-tech.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2013 Acura RLX is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few divergent ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Acura RLX. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of alternative things. It can be as definitive as your gas cap being loose or as scrupulous as engine knocking. If your check engine light is on in your 2013 Acura RLX, contact David McDavid Acura of Austin. Contact David McDavid Acura of Austin today! Our Acura service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

Is it safe to drive your 2013 Acura RLX with the check engine light on?

This question is not very effortless because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is frequently indicated by a possible glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more strict problem. If the check engine light is flashing, this means that there is a strict issue and it is recommended to service your Acura RLX at this moment. Call the experts at David McDavid Acura of Austin by dialing 5126436468 so you can describe the issues. Or reduce your speed and bring your 2013 Acura to our certified mechanics as soon as suitable.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more strict failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it better to get the great code reading and diagnosis. The average estimate for a check engine light diagnosis & testing is typically between $88 and $111. The better news, David McDavid Acura of Austin offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.